Mowed grass, fallen leaves and only debris out of the trails and yard is convenient to eliminate with a particular blower. This kind of garden application has “caught on” overseas. We have most homeowners use the usual rakes and brooms, without appreciating the benefits of automation. But actually, using a blower to clean up the place can be very simple and quick, saving time and energy.
The market provides a huge variety of garden vacuum cleaners: from the simplest models to exceptionally functional models. The cost of the tool is dependent upon the functionality and equipment of a particular unit of equipment, but generally the average Russian is quite able to afford to have this type of system in the market. Concerning the types, advantages and disadvantages of blowers we’ll attempt to tell as much detail as possible, so that everybody can orientate themselves in various versions and select for themselves the best of them.
Functional features
Picking a lawn blower to the garden scheme, it is necessary to determine what functions it must do. In the end, along with the Normal blowing, the backyard machine could have a suction function and shredding:
- Blowing enables you to wash the avenues of dust and smaller stones, push leaves off the yard with a strong stream of air. This function is a staple of all blower models. The ability of the engine of the system itself determines the potency of this air flow. Some versions of such equipment can move even half a brick.
- Garden vacuum cleaner in addition to blowing off features a suction feature, which is quite handy when dealing with leaves and other organics. Such models are equipped with a unique bag where the suctioned debrisleaves is accumulated. Such a storage bag is also included with the mill and is readily cleaned as it warms up. Garden vacuum cleaner for cleaning leaves has a button which allows you to change the device from mill style to vacuum cleaner mode and back.
- The shredding function can match garden vacuums. Leaves and grass fines fill the principal volume of this bag as economically as possible, since stained organic matter takes up 5 and sometimes 15 times less distance than unprocessed organic issue. Compost from such plant trash quickly becomes overcomposted.
It is worth noting that in certain versions the shredding function is triggered simultaneously with the suction function and cannot be switched off. At precisely the exact same time, there are blowers equipped with three distinct functions. This point ought to be paid attention to when buying a backyard vacuum cleaner.
Important! Based upon the energy, some types of garden blower are able to suck and shred not only leaves and grass, but also branches, cones, acorns, chestnuts.
The performance of blowers mainly determines the price of garden equipment: the more equipped the machine, the costlier its own cost. However there are exceptions, by way of instance, the domestic maker”Zubr” provides a powerful, equipped with all the latest features of a backyard vacuum cleaner for cleaning leaves for only 2.5 million rubles. The cost of similar performance of foreign-made machines may exceed this amount by various times. What’s a leaf blower designed?
The plan of garden blowers differs slightly based on the operation. The standard equipment of the simplest components includes a blower nozzle and a motor. If we are referring to a garden vacuum cleaner, then this type of machine is going to be equipped with an additional bag for gathering debris. For the shredding of organic thing, the producer uses knives. The principle of operation and also conditional design of this garden vacuum cleaner using shredding function could be seen in the picture below:
The photo shows a double pipe. One channel in this gadget is designed for air circulation within the process of dismissing otente.ru. The next channel functions as a vacuum cleaner and pulls the debris through itself. This layout is valuable when lots of blowers have only one station at the spigot to operate in two modes.
In practice, two means of developing violets from seeds have been utilized: sowing seeds immediately from the open ground or pre-cultivation of seedlings. The latter process is considered more effective, since when using it, you can get flowering plants in the current year.
To acquire high quality planting substance, sowing seedlings must be carried out of the past decade of February or in March. To execute such activities after mid-spring is not advisable, because the seeds have been sown in the open area in the last ten years of April or in early May.
Pre-prepared and calibrated seeds could be sown in any container, including plastic cups, cassettes, cuts of plastic bottles or food packaging. To ready the nutrient mixture, ingredients such as garden soil, humus and peat are utilized. All elements have been required in equal proportions and mixed thoroughly.
When using the traditional system of sowing, shallow furrows, about 3-5 millimeters, are created in the nutrient solvent using a pen, the space between the rows is currently approximately 1 centimeter. Then the seeds are placed in the holes every two centimeters and covered by soil. Now, it is crucial to water the crops with water and cover the container with transparent film.
The very first sprouts of pansies usually look in 7-10 days from the time of sowing. A after sprouting of seeds stems in the cases of:
- The use of older planting substance;
- in case of filling that the seeds with a thick layer of dirt;
- when utilizing a nutrient substrate of the wrong composition, as an instance, clay soil.
Growing violets from seeds: when to plant, planting and care, species and types
After sprouting, the crops should be found on a well-lit windowsill. In the spring time, the direct rays of the sun pansies aren’t afraid, so containers with seedlings can be put even in the southern region of the apartment. After sprouting, the violet has fairly strong stems, but that does not mean which you will need to immediately eliminate the movie from the container.
Viola requires a fantastic watering, but moistening the soil should be carried out as the top layer dries out. To carry out such steps, it’s well worth using melt or rain water. Regular tap water must preferably stand for 2-3 days. Plants are scared of overwatering, because a high concentration of water in the soil may cause rotting of their flower roots. Deciding up violets
Transplant young plants into new containers needs to be if the first two leaves are shaped. Pansies aren’t terrified of transplanting, they take root at a new nutritious substrate despite minor damage to the root system, which occasionally happens when the plant is removed from the container. Such violets are a bit slower in development, but the general performance isn’t affected.
With a lack of light or muddy area in the window sill, violet seedlings can extend out. To receive a quality healthy blossom, such cultures when selecting in a new container are deepened into the cotyledons, which will give a chance to find additional roots on the underground portion of the stem. Pruning
Such an occasion as stem pruning lets you reach a better tillering of the civilization. Such measures are completed following the look of 5-6 actual leaves.
Planting of backyard violets at a permanent location is dependent on the climatic features of a specific region. Such actions should be performed with the start of warm warm weather in the past ten years of April or in the very first days of May. For planting the blossom allocate a well sunlit area.
After digging the dirt for every planting hole, add crushed charcoal at moderate fraction of 200 g and also the identical quantity of humus. Viola develops nicely in soils comprising peat, humus and sod soil in equal proportions with the addition of half of the sand.
During transplanting to a permanent location, ready seedlings are put on the plot each 15-20 centimeters. Cultures are sunk to the formerly dug holes and covered with soil. moyakovka.ru Then compact the soil around the bushes and water the plants with warm water. When developing backyard violets, it’s necessary to divide the bushes from the plantings every 3 years.
Not every gardener will want to deal with the cultivation of pansies seedlings, because it’s quite a troublesome job. In this respect, many flower growers sow seeds directly into the ground. In this case, the flowering of violets will begin in late summer or in September. To obtain the flowering of this culture the subsequent year, in early spring, the seeds should be sown in August.
Classic differences
One of the most significant differences is the steam. Russian bathing involves wet steam, but in the Finnish it is dry. What is it all for? Steam, saturated with moisture, enables you to use low-temperature air. Since the humidity is nearly maximum, then in the human body almost doesn’t evaporate perspiration. As a result, the body warms up considerably more efficiently, and the level of dehydration is almost minimal.
Dry steam won’t allow unexpected overheating. Since sweat is your main means of cooling the body, the decrease in its evaporation in high humidity nearly completely removes the chance of normal thermoregulation. In short circuit, this hazard is significantly reduced. Historical summary
It is mistaken to believe that the ancestor of this tub is historical Russia. History proves that in the distant past steam chambers have been among different peoples. Every nationality modified, additional new components in the creation of their own steam rooms.
The forefathers of this eastern”hot” places are regarded as the Roman thermae. Muslims thought that in the steam rooms sinners are washed in the evil that consumes the body, mind and soul.
The sauna has been known for many decades. Considering its origins, the steam room has undergone few changes. The principal characteristics and characteristics have been maintained to the day. In Finland, going to the steam room is considered an essential ritual, even a centuries-old tradition that must not be neglected.
Back in Russia, the construction of the house long started with the building of the sweat lodge. In many European towns there were instances when visiting the bathrooms had been placed under a ban, but the Russian sweat lodge was in honour and individuals didn’t stop seeing it.
Features of this steam space
Often the construction is situated separately. Normally, the bathhouse is constructed from timber, more often coniferous species. Obligatorily the Russian bath includes two bedrooms. These are steam space and pre-bath, which is likewise an anteroom, dressing room and rest room. All rooms necessarily have a window. It is necessary for improved ventilation.
In the pre-bath there is a sauna cooker, which can be heated with wood. The main element that creates heat are the rocks – therefore the name of this furnace, which is normally erected in the partition between the chambers. The principal part of this, in addition to the stones are from the steam room.
Stoves could be open and closed. Open solutions are considered more practical, particularly when the sauna is currently employed as planned several times every day. This type of stove warms up the room faster. However, because of the frequent watering of these rocks, it cools down quickly. Stones for all these structures are put within the firebox. The furnace can heat up to 300 levels.
Closed-type apparatus for better heat transfer is equipped with a unique steam door. When the wood is burnt and the door is shut, no more smoke enters the steam room. The furnace can heat the rocks to very serious temperatures. Before going to the steam room, the door is ajar and the space is heated up. Closed furnace has to be heated beforehand – about two to five hours before the beginning of the procedure. Due to the properties of these stones, such a style can maintain heat for 2 days.
The difference moisaiding.ru between the tub and sauna will be from the layout features, and more precisely in the arrangement of these stones. In the first circumstance, they are placed within the furnace, so they’re heated more powerful and cool down quite slowly. In the sauna the stones are placed on the surface of the furnace.
The humidity in Russian bathrooms is prohibitive. In a temperature of 50-70 ° C humidity reaches 80 percent. Russians think about a broom to be the main accessory for your own steam room. Just think about the vapor procedures, as instantly remembered twig patting physically. Someone utilizes tied bars for direct use, others steamed the product and revel in the pleasant aroma that spreads round the space.
In the Russian bathhouse you can’t simply lie on a shelf and rest peacefully. Every steam session implies walking beneath the gangplank, lifting up to disperse the air accumulation, and jumping aggressively into the icy ice-hole. Russian bathhouse attendants are noteworthy for the simple fact they like to jolt their own bodies harshly. In addition to elevated air temperature, which increases pressure on the heart and blood vessels, and constant movement forces the heart to work at a rapid rate.
High humidity can help to normalize the respiratory system. Many physicians prescribe a course of treatment in the steam room. Using aromatic oils improves the impact of warm steam on the body, reducing the chance of gout, osteochondrosis.
Greenhouse using double-glazed windows is relevant not only in areas with cold climate, but also in other suburban zones for prolonging the duration of fruit-bearing of submerged crops or year-round use.
The Benefits of these glazing are undoubted:
- Outstanding thermal insulation will protect crops from early frosts.
- Glazing gently diffuses light, illuminating all corners of the space.
- Double glass averts sunburn on the leaves.
- Tight structure reduces heat loss when warming the greenhouse, and therefore saves energy.
- Packages will not suffer from strong winds, hail or rain.
- The service lifetime of glazing with proper treatment is more than just a dozen years.
- The aesthetic look of glazing allows you to not hide the greenhouse from the backyard, and install it even in the front yard. Some proprietors of initial shape greenhouses make them the main decoration of their lawn or garden.
Furthermore, manufacturers offer double-glazed windows with a set of necessary functions, including special coatings for heating and energy conserving protection against mechanical impacts and reduced temperatures, in addition to soundproofing.
Method of auto-ventilation of all greenhouses.
- Double-glazed windows can be with special vents for ventilation, that can be outfitted with apparatus with the role of automatic launching masterseptika.ru. This is very convenient, because not necessarily the owners have the chance to ventilate the greenhouse punctually.
- Benefits of glass greenhouse buildings
- Below are merely a few of the advantages of glass greenhouses:
- Glass greenhouses have proven over time to become long-lasting structures. By way of instance, the French have been actively using just such greenhouses since the late 16th century to the current moment. Rest assured: that a glass greenhouse will become your servant for decades to come.
- Glass does not keep UV rays, which are essential for quick plant growth and fruit ripening, hence allowing you to get the most out of the power of sunlight.
- Should you use laminated or tempered (thermal) glass, then this structure will withstand the most adverse conditions (precipitation in the form of large hail, intense heat and also powerful frost won’t be a problem with the structure ). Moreover, there is an opportunity to put in heating apparatus in them.
Of course, the glass greenhouse also has disadvantages, that ought to be taken into account when constructing it.
How to build a greenhouse from yourself
On a sunny day, the translucent coating of greenhouses allows short-wave solar power. It’s absorbed by black surfaces (ground, equipment, plants), turns right into long-wave radiation and remains in the construction. This very transformation occurs with the discharge of heat, which creates a greenhouse effect inside the greenhouse.
So, glass windows absolutely allow the sun’s rays inside the space and nearly completely keep the rear radiation, not allowing it to venture out. In other words, unlike movie, glass has become the most heat-saving material, and this is among the principal attributes of a great greenhouse.
The definition of plaster is as follows – it is a finishing coating, which can be formed after the curing of the building mixture. It’s utilized to apply to an untreated surface (concrete, brick, and timber ) of an amalgamated structure and permits you to achieve a rough leveling of these walls. The coating can attain several centimeters.
There are two large collections of plaster:
- Routine.
And if the first functions only as a foundation layer, which is then going to be applied finishing, and then the decorative is used as the last layer. The mix is protected from most of negative environmental variables and allows you to make a gorgeous texture on the surface. But since we would like to learn what the distinction between a simple plaster and putty, we won’t touch the decorative mixes. To summarize, the decorative mixes differ in their arrangement, their granularity is higher, and their plasticity is less.
Regular plaster is divided into several types, depending on the main element in the composition:
Formerly, plaster blends based on clay were rather popular. It’s fantastic to decorate and insulate wooden buildings. Yet, its performance characteristics aren’t satisfied. Since the price of this product is low, plaster is used for completing agricultural buildings.
To reach a coarse leveling appropriate compositions of its own production. All these are cement-sand mixtures, also compositions of lime and similar elements. They are mixed with water. It’s these mixes are perfect for residential buildings positioned in areas where there is a good deal of sound (train stations, airfields, houses near stadiums, etc.).
As stated by the technology, plaster is permitted to employ both a thin coating (a few mm) plus a thick 1 (greater than 1 cm). The application process itself can be divided into various stages:
- The method of massaging or spraying. Spattering is carried out by means of a mechanical instrument. The process is fast and simple. Sketching is performed manually with a trowel or master. The chief goal is to smooth out any imperfections in the wall, creating a base coating of fixation on the surface.
- After plastering or screeding, it is crucial to employ a smoothing coating. It may be one or more layers. It helps build up the thickness of this coating on the wall and also to elongate the airplane. And to increase adhesiona primer is applied. It is the last. Often, instead of it, putty is applied to the prepared surface. This will let you make an even more smooth arrangement. If you do not do so, then the covering layer of plaster will probably be rough. There are times that you need precisely this property. And how long should plaster warm before puttying? All of it depends on the form of composition. This can be found out to the packaging from the products. masterprofnastila.ru
- It turns out the putty on the final plaster is a common thing. It is allowed to employ putty, moreover, it should even be carried out.
Considering that the leveling layer can be thick, the technology of applying plaster requires the usage of beacons and net. Beacons – manuals, thanks to which a coating of any thickness is accessed evenly and without gaps over the length of the wall. Beacons form a section on which plaster is elongated by means of a rule. And the mesh employed for reinforcement involving layers averts plaster from cracking, extending and coming from the surface.
According to the definition, even a putty is really a paste-like or powdery material used before the use of confronting substance in interior decoration. They permit you to receive a perfectly horizontal surface, smooth and of top quality, which can be painted or taped with binders.
The plant’s requirement for warmth is set by the whole sum of temperatures throughout the period from marijuana blossoming to berry ripening.
- Early varieties Want the Whole temperatures of 2200-2400 C.
- Late types need more heat – from 3000 C.
In the middle belt of Russia, the amount of temperatures in summer time reaches 2190 C. Therefore, most varieties need more than 110 times for full adulthood.
Growing grapes is interesting as it needs the gardener to continuously do his own research and analytic work. Even when the winegrower is totally armed with theoretical knowledge, creativity is demanded of him. The growth of the blossom is subject to specific rules, but in each single area, literally in each garden, even more so in greenhouses, the exact plants grow otherwise, requiring individual working techniques. Take, by way of example, the main system.
In places that are dry, online clay, stony and rubbly lands, the origin penetrates to a depth of about 4 m. at which the subsoil is continually moist, the root lobes expand wide and are located to a thickness of up to 1 m.
The biological phases of the plant must also be taken into account. To understand the vineyard and strategy function, you will need to have an concept of the annual cycle of blossom development.
One of the many agricultural techniques, the trench approach can be considered preferable. With this process, nutrients are applied to the soil at highest region and depth. The roots of the grapes are provided with fertile soil for 30-50 years – almost the entire life cycle.
Planting sequence:
- First, the top soil layers are removed and laid separately.
- A trench roughly 60 cm deep is dug.
- At the masterfasada.ru very base put a drainage layer of shattered rock – roughly 10 cm thick.
- About 1/3 of this thickness in a hole set a nutrient substrate – peat (3 components ), sand (two components ) and subsoil loam (7 components ).
- Vine cuttings are planted.
Grape plants find themselves in a healthy environment. Their root system can develop downward and sideways, and from above it is protected by a hot loose cushion.
Greenhouse for avocado design with a removable top
A broad range of blossoms is available within our store. Among the forms of legendary, widely known and the finest of contemporary you can easily pick the one that you want. For growing in greenhouses appropriate super early and early types of grapes, having a maturity period of their berries out of 90 to 120 days.
1. Cellular polycarbonate having a depth of 6 mm has been selected as the material to cover the greenhouse for blossoms. Today this material is a pioneer in the production of greenhouses for any goal. It isn’t prickly, fire resistant, easy to handle with the simplest tools. Polycarbonate (hereinafter PKB) retains heat well – on a bright winter the atmosphere in a greenhouse warms around zero temperatures and then it gradually declines during the evening .
Greetings everybody in another report! While operating a particular device, the consumer sometimes encounters unpleasant moments. Today I will touch on one of these. Within this informative article, I made a decision to provide some hints about how best to have the drill out of this drill, if you do not succeed. The explanations for not being able to do this apparently uncomplicated thing can vary widely. Here I have described the Primary facets on this topic and have highlighted three main areas that I feel have to be revealed:
- Shifting the drill in a generally working chuck;
- pulling the drill bit with no wrench;
- extracting a drill bit that’s stuck due to a sort of present damage.
Let us consider each of those circumstances individually
In modern drills, two basic types of chucks are employed, which vary in the means of fixing the drill bit. The first type includes crucial chucks. This layout allows you to fix the drill through a special secret, which rotates the fixing ring at the clockwise direction before the complete fixation of the element.
The second type consists of quick-change chucks. This is very handy when it is essential to replace the tool frequently. But , there are situations when it’s difficult to change the drill from the chuck. In such a scenario, it doesn’t harm some useful recommendations about how best to remove the drill from the drill without a wrench. We will tell you about it further under.
The method of how to pull the drill from the drill in normal conditions looks very simple. The cams of this mechanism holding the drill bit have been unlocked by turning the adjusting sleeve or by simply turning the wrench from the contrary way to the clockwise movement. After this procedure, the drill bit must come out readily.
If it is not possible to turn the adjusting sleeve, then consider raising the force. It is also likely to create an original drive, permitting to rip the movable component from the own place. The very first step is to try and turn the sleeve aggressively by hand. If this effort does not work, you may attempt to accelerate the capsule to maximum speed in reverse mode, and at this stage attempt to shake the capsule case by hand. This is an effective approach to find the drill bit from the drill.
Then, if the previous attempts were unsuccessful, you are able to apply force using a wooden or rubber mallet. To start out with, fixing the fixed portion of the chuck, you must strike the sleeve, although not at the conclusion, but on a tangential trajectory. You may even strike the handle of the wrench, creating a temporary brute force.
To use more force into the fixing gidpostroy.ru sleeve, the use of a vise is suggested. To do this, the drill bit in the chuck has to be securely clamped inside. And the drill itself needs to be placed to the surface of the workbench. Next, with a light hammer, it’s required to lightly tap on the alteration sleeve of this throw in a circle.
When the cartridge case has yielded, it should be turned using a pipe wrench. If the effort is unsuccessful, the job should be repeated, raising the force of the blow. It’s better to utilize a bronze hammer for this procedure so the top layer of the cartridge receives less damage.
When it’s crucial to modify a drill bit that has fallen into disrepair, or when a shift in the nature of the work needs a different one, the process is even simpler than if placing the drill bit.
Step-by-step instructions to gluing inner corners
After completing, the main problem can be irregular walls and the resulting springs on the background. It is also necessary to take into consideration that when the walls are crooked, the joints of background canvases may diverge.
After gluing the previous one in front of the inner corner of the cloth should measure the remaining distance. It’s measured from the border of the glued cloth to the adjoining wall, and the resulting figure is inserted 10-15 millimeters. When the partitions are very curved, the extra figure may be more.
Cut a strip equivalent to the resulting figure, taking into account the allowance. The surfaces are treated with glue. Based on the type of coating it could be precisely the wall or both surfaces.
The strip is glued individually using the cut side into the wall. The wallpaper should go on the other airplane.
If the glued background is wrinkled, you have to make a few little cuts perpendicular to the folds.
Level or incline on the adjoining wall is a perpendicular line. The distance in the corner is equivalent to the diameter of the preceding cut strip, not including additions.
The surfaces are smeared with adhesive, and then the coat is glued into the wall with the flat side towards the marked line. gidpola.ru The cut goes onto the adjacent wall.
Protruding corner should be glued by analogy with an inner, however there are little gaps, which also need to be taken into account when working.
Measured the space remaining out of the glued background to the adjacent wall. Insert 20-25 millimeters to the obtained figure.
A segment is cut off, taking into account the added 20-25 millimeters.
Before gluing, the surfaces have been treated with adhesive.
The edge has to be glued to the wallpaper fixed on the walls, your own cut side”goes” into the adjacent plane. If needed, small cuts are created in the area of going to another background, smoothed and pushed into the wall.
Draw a vertical strip on the adjacent wall in a distance of just glued cut strip and 6-10 millimeters.
After applying the adhesive, the strip is placed on the wall with its flat side towards the line, going over the border of this already glued strip.
The joints are smeared with glue and ironed using a roller. After that, the top layer is trimmed across the ruler and the 2 layers are joined together.
Closets in the Entire wall
Soviet”walls” have long lost their expertbrusa.ru significance, but some folks still can not give up this type of bulky storage system. What’s the disadvantage of such furniture? Massive cabinets of unnatural dark brown colour visually poison the interior, eating up nearly half of the valuable space. Many assert that the”walls” are extremely roomy, and for that reason crucial, but is it truly required to store a massive number of things in the house?
Psychologists have long ago decided when you unclutter your flat, you eliminate not only the obsolete stuff, but also of negative ideas, making space in your favorite residence and in mind. If the budget does not allow replacing furniture with fresh, you can simply disassemble the walls socket and, leaving a part of the cabinets, repaint them in a lighter color. Nowadays, remodeling older furniture will be deservedly gaining in popularity.
Gypsum plasterboard structures.
The moment gypsum emerged on the building marketplace and became available, most designers started to demonstrate its capabilities, assembling inconceivable walls, arches, multi-level ceilings and markets. Today the world is striving for minimalism. Modern experts no longer suggest overloading the space with drywall compositions that don’t have any purpose besides cosmetic. Creating such a design, a person immediately turns his new interior into an obsolete one.
Wallpaper using a print throughout the room
A large or little pattern on the wallpaper, which can be pasted over the full area, visually overloads the interior, making visual sound. It saves neither the designer furniturenor the perfect sequence, nor smart lighting. This is particularly unattractive if the decoration is contrasting. Background over the entire wall space automatically makes the setting look old-fashioned. If you like active wallpaper so much, it’s suggested to utilize it in dosage: over a little region of the wall.
Curtains with Plenty of information
Another anti-trend in the interior – curtains and tulle with a enormous number of folds, ruffles and decorations. Fabric shops are interested in the fact that the customer acquires”lavish” tiered curtains, or even better, hire a designer and also invest a great deal of money for whole compositions with lambrequins and hemstitches. However, in average apartments, these creations seem strange. Instead of the obsolete trend, it is much better to provide preference to simple laconic curtains and roller blinds.
Furniture with curved corners.
Computer desks with sleek lines, radius closets for clothes, kitchen places using curved facades – that furniture became memorable when it appeared in the Russian market, and is still successfully sold.
Granite countertops may be convenient, but at a contemporary interior look old-fashioned and with their appearance draw too much attention. The use of original styled furniture is appropriate only in ultra-technological high-tech, but to recreate it will demand not only a feeling of style, but in addition a considerable budget.
A keychain out of a branch
Such a stylish holder isn’t hard to make from throwaway fabrics, so it does not ask for a great deal of expenses. You and your little one may earn a keychain collectively – it’s fun and interesting.
Check out an interesting choice of storage tips for a small hallway.
Keybox from a branch
The picture indicates a hand-painted keychain, the wealthy design of which perfectly harmonizes with all the laconic white backdrop. Tools and stuff
You will need:
Let’s proceed to the creation of this handicraft:
1. Find a branch of suitable depth wash it with soap or whitewash, dry it in the sun or on a radiator. Paint the dried branch using oil paint.
Versions of painted branches.
2. Screwing hooks to the branch. If the wood is too difficult, you make holes of the ideal diameter, add glue and insert the pins.
Hooks to get a keychain
Hooks inserted to the division.
3. Drilling holes for screws, with that to attach the completed keyhole into the wall.
The hole
The product design may be some: the keybox will be memorable and original.
Keybox made of Lego
Multicolored holder looks harmonious in a contemporary inside and immediately attracts attention. It will be valued by creative people and fans of the legendary constructor. It is not tricky to make a keychain.
Lego keychain
You may need:
- Lego basic platform;
- A set of Lego bricks;
- Double-sided tape or screws;
- Level;
- Keys on a string with a domiktop.ru ring.