Marzo 2021

Step-by-step instructions to gluing inner corners

After completing, the main problem can be irregular walls and the resulting springs on the background. It is also necessary to take into consideration that when the walls are crooked, the joints of background canvases may diverge.

After gluing the previous one in front of the inner corner of the cloth should measure the remaining distance. It’s measured from the border of the glued cloth to the adjoining wall, and the resulting figure is inserted 10-15 millimeters. When the partitions are very curved, the extra figure may be more.

Cut a strip equivalent to the resulting figure, taking into account the allowance. The surfaces are treated with glue. Based on the type of coating it could be precisely the wall or both surfaces.

The strip is glued individually using the cut side into the wall. The wallpaper should go on the other airplane.

If the glued background is wrinkled, you have to make a few little cuts perpendicular to the folds.

Level or incline on the adjoining wall is a perpendicular line. The distance in the corner is equivalent to the diameter of the preceding cut strip, not including additions.

The surfaces are smeared with adhesive, and then the coat is glued into the wall with the flat side towards the marked line. gidpola.ru The cut goes onto the adjacent wall.

Protruding corner should be glued by analogy with an inner, however there are little gaps, which also need to be taken into account when working.

Measured the space remaining out of the glued background to the adjacent wall. Insert 20-25 millimeters to the obtained figure.

A segment is cut off, taking into account the added 20-25 millimeters.

Before gluing, the surfaces have been treated with adhesive.

The edge has to be glued to the wallpaper fixed on the walls, your own cut side”goes” into the adjacent plane. If needed, small cuts are created in the area of going to another background, smoothed and pushed into the wall.

Draw a vertical strip on the adjacent wall in a distance of just glued cut strip and 6-10 millimeters.

After applying the adhesive, the strip is placed on the wall with its flat side towards the line, going over the border of this already glued strip.

The joints are smeared with glue and ironed using a roller. After that, the top layer is trimmed across the ruler and the 2 layers are joined together.

Closets in the Entire wall

Soviet”walls” have long lost their expertbrusa.ru significance, but some folks still can not give up this type of bulky storage system. What’s the disadvantage of such furniture? Massive cabinets of unnatural dark brown colour visually poison the interior, eating up nearly half of the valuable space. Many assert that the”walls” are extremely roomy, and for that reason crucial, but is it truly required to store a massive number of things in the house?

Psychologists have long ago decided when you unclutter your flat, you eliminate not only the obsolete stuff, but also of negative ideas, making space in your favorite residence and in mind. If the budget does not allow replacing furniture with fresh, you can simply disassemble the walls socket and, leaving a part of the cabinets, repaint them in a lighter color. Nowadays, remodeling older furniture will be deservedly gaining in popularity.

Gypsum plasterboard structures.

The moment gypsum emerged on the building marketplace and became available, most designers started to demonstrate its capabilities, assembling inconceivable walls, arches, multi-level ceilings and markets. Today the world is striving for minimalism. Modern experts no longer suggest overloading the space with drywall compositions that don’t have any purpose besides cosmetic. Creating such a design, a person immediately turns his new interior into an obsolete one.

Wallpaper using a print throughout the room

A large or little pattern on the wallpaper, which can be pasted over the full area, visually overloads the interior, making visual sound. It saves neither the designer furniturenor the perfect sequence, nor smart lighting. This is particularly unattractive if the decoration is contrasting. Background over the entire wall space automatically makes the setting look old-fashioned. If you like active wallpaper so much, it’s suggested to utilize it in dosage: over a little region of the wall.

Curtains with Plenty of information

Another anti-trend in the interior – curtains and tulle with a enormous number of folds, ruffles and decorations. Fabric shops are interested in the fact that the customer acquires”lavish” tiered curtains, or even better, hire a designer and also invest a great deal of money for whole compositions with lambrequins and hemstitches. However, in average apartments, these creations seem strange. Instead of the obsolete trend, it is much better to provide preference to simple laconic curtains and roller blinds.

Furniture with curved corners.

Computer desks with sleek lines, radius closets for clothes, kitchen places using curved facades – that furniture became memorable when it appeared in the Russian market, and is still successfully sold.

Granite countertops may be convenient, but at a contemporary interior look old-fashioned and with their appearance draw too much attention. The use of original styled furniture is appropriate only in ultra-technological high-tech, but to recreate it will demand not only a feeling of style, but in addition a considerable budget.

A keychain out of a branch

Such a stylish holder isn’t hard to make from throwaway fabrics, so it does not ask for a great deal of expenses. You and your little one may earn a keychain collectively – it’s fun and interesting.

Check out an interesting choice of storage tips for a small hallway.

Keybox from a branch

The picture indicates a hand-painted keychain, the wealthy design of which perfectly harmonizes with all the laconic white backdrop. Tools and stuff

You will need:

Let’s proceed to the creation of this handicraft:

1. Find a branch of suitable depth wash it with soap or whitewash, dry it in the sun or on a radiator. Paint the dried branch using oil paint.

Versions of painted branches.

2. Screwing hooks to the branch. If the wood is too difficult, you make holes of the ideal diameter, add glue and insert the pins.

Hooks to get a keychain

Hooks inserted to the division.

3. Drilling holes for screws, with that to attach the completed keyhole into the wall.

The hole

The product design may be some: the keybox will be memorable and original.

Keybox made of Lego

Multicolored holder looks harmonious in a contemporary inside and immediately attracts attention. It will be valued by creative people and fans of the legendary constructor. It is not tricky to make a keychain.

Lego keychain

You may need:

• Lego basic platform;
• A set of Lego bricks;
• Double-sided tape or screws;
• Level;
• Keys on a string with a domiktop.ru ring.

A corner apartment is located at the end of the construction: this is, part of its walls aren’t adjacent to the interiors, but would be the outer walls of the house.

There may be one apartment in a corner apartment – it occupies the entire end of the home, it’s also known as a corner flat. Or two – the windows of one overlook the road, the second – the yard. Is based on the building program, the layout of the assumptions.

There is also a”separate caste” – housing with walls from the expansion joints. Such”gaps” between entrances are usually made in multi-story structures, the principal undertaking of the created unit – to split the deformation forces throughout the shrinkage of the building, in case of emergencies. Pros and cons of both corner flats at the joint are somewhat different from the conventional ones using this road – we’ll pay special attention to this topic in the previous section.

Temperature

Since the 2-3 sides of this space is outside, in winter it is 3-5C colder, and in summertime on the contrary – warmer. Especially if the conclusion of the house is heated by the sun. In some cases, the difference reaches 10C – but such a distinction is improper, indicates a problem with the outside of the home – most probably have to contact the management business, requesting (or forcing) to fulfill their immediate responsibilities, to patch the cracks shaped.

Corner flat in a brick house with thick walls is much more comfy. Such risks are not exposed – the thickness of the wall functions as a buffer, so not allowing overheating, overcooling.

Humidity

When an area has just one wall combined with the road, it usually has sufficient room warmth to domikday.ru prevent freezing and warmth. However, when there are two outside partitions, and they are adjacent – there is a high probability of freezing in the corner, the creation of condensation in it, and consequently – mould, fungus. Their spores not just spoil the overall look of the room, but also cause the look, complication of several serious ailments.

Important! The problems of corner place are compounded when the factors are linked – too low temperatures from heating batteries along with dampness is sure to result in moldy walls.

After all, in this state it’s made so well that such products could be safely placed in the listing of the primary national symbols of Spain.

Where’s it created?

Spain was among the first European nations, where they began to produce such products, and now is in 2nd place from the list of exporters of the world, supplying its products to almost 200 nations. Such popularity lies in the unique mix of thousands of years of tradition, and at using invention, by which Spanish tiles have become the standard of excellence.

The regional factories, of which you can find 350, employ nearly half the population. Factories appreciate their standing tremendously, always introducing the most recent technology. For example, because of hydraulic cutting procedure on the high-precision gear they produce tiles of any form.

It was in Spain that they devised a unique method of four-color printing, which dizainlandshafta.ru permits high precision transfer of any picture on the product of the sort.

Range of collections of hot brands

The inexhaustible imagination of Spanish designers is impressive. Every collection by local brands may be safely called a true work of art. Floral and artistic motifs, arabesques and geometric patterns, controlled classics and elegant art deco, glistening perfect surface and unconventional relief – this is supplied by manufacturers from Spain. There’s a very long list, but it’s far better to see these .

Spanish tiles are the best answer for finishing your property. Primarily, because such products are dependable, and second, because they’re very beautiful.

In the end, many European tile producers chose to conceal the structure of stone and marble below the glass. Plus it will surprise nobody. However, to hide the structure of the metal under the glass for the first time the Spanish factory Grespania decided to do it.

Grespania Palace New York set is glazed, rectified and frost-resistant porcelain tiles. Such tiles for the floor are perfect for installation in the corridor, kitchen, bathroom.

Don’t be afraid to select ceramic tiles from Spain, with which your interior will get a distinctive charm and a true Spanish character.

Floor coverings in modern layout are represented by means of a number of substances, many of which resemble natural wood in their own characteristics. The leading position among this chic assortment is taken by tiles . It is manufactured artificially using natural raw materials. As a result of rich choice of textures and colors, such floors look magnificent and stylish, and fit with almost any style of room design.

Advantages and disadvantages

The massive demand for floor tiles under laminate is explained not only with their presentable appearance, but also by a range of advantages. Porcelain stoneware is significantly different from traditional ceramics and natural solid timber, therefore it’s often employed as the main component for decorating floors.

Among the positive properties of the material can be distinguished:

• Reliability in operation. The coat doesn’t wear off and doesn’t lose its 1poshtoram.ru attractiveness even after 50 years;
• security in application. The boards are resistant to elevated temperature fluctuations, they do not catch fire;
• neutrality to chemical influences. The material is impermeable to water, therefore it’s not a favorable place for the creation of fungus and mould;
• excellent thermal insulating material. Such coatings are suitable for the system”warm floor”, as they contain clay, which at elevated temperature Can conduct heat well;

aesthetics. In look, the tiles aren’t inferior to flooring made of pure stone or wood.

No matter how ideal this substance is, it is not devoid of disadvantages.

The primary disadvantages of synthetic laminate may include:

• The large cost. The product, that can last more than a dozen years is expensive, but in performance, these prices are certain to pay off;
• low rates of noise insulation.

Varieties

So far, tile below the laminate is produced of two different types: ceramic and ceramic stoneware. The first variant of the coating is obtained from the technology of monocottura.

This type of product is characterized by high strength, resistance to moisture and vapors, well withstands mechanical loads.

In addition, the ceramic floor is frost-resistant, but its outside coating is subject to wear and tear over the years.

In terms of porcelain stoneware, it is produced of special types of mineral and clay impurities, whose composition is similar to that of natural stone. Such boards are burned and pressed under high pressure. The result is a durable and beautiful finishing substance.

The two kinds of boards exactly replicate the proportions and dimensions of the floorboard. Rectangular shapes are the most common, but sometimes square ones are available.

The substances of which the house is constructed, aren’t so important for its visual appeal. Coziness and attractiveness of the rooms gives the interior decoration. Widely common imitation pub, since it lets you realize a variety of design solutions, in addition, gives the chambers a distinctive and unique appearance. Also with the help of this substance, you can without unnecessary effort and expensive alignment of these walls that need repair.

Features

Imitation beams are produced from natural wood of various species. This usually means that the color and texture of these substances have differences. It is impossible not to remember that this substance meets all the demands of ecological friendliness. Due to how the maximum naturalness is present in the plan of the rooms, being in such a room is very comfortable.

Since the basis is timber, durability and strength of imitation bar, its exceptional properties of solid insulation and warmth insulation should be emphasized. Creating a comfortable microclimate at the area leads to the low thermal conductivity of products. Additionally, the choice of wood of particular species will attest its therapeutic properties.

Also one of the advantages ought to be mentioned the ease of setup. All areas of the structure have linking grooves and spikes and virtually no load on the surface, thus protecting it from deformation.

In case the house is constructed from a natural beam, the price can increase at times, as well as the significant time lost while awaiting the shrinkage process.

However, like every natural wood, fake has its own shortcomings. The material should be regularly coated with antiseptic compositions, in addition to paint or varnish.

Boards of inadequate quality might not be strong enough, they can warp and dry over time, in addition to exposed to rotting processes. This can be avoided only with the requirement of purchasing quality products from proven manufacturers.

Design

Finishing under the fake beam could be of two types: monolithic and combined. It is dependent upon the plan idea.

Monolithic finishing is a complete paneling of the space using a pub imitation. In cases like this, they can cover the walls, floor and ceiling. The panels fit together quite closely, forming one composition.
Combined decoration incorporates different substances. The foundation is that the imitation beam, and a few areas of the room can be covered, by way of example, with tiles or wallpaper. The main thing is to make sure the finish was done in the exact same style and the exact same colour scheme. It’s also likely to comprehend original designs by mixing several types of wood.

Irrespective of the kind of finish, together with imitation beams will need to buy additional decorative components. They can be made not only in 1popechi.ru the colour of the wood, but also in any other shade: black, white, chrome and others. In the construction market these particulars are introduced in a diverse range.

The summer kitchen is rightly considered a favourite place in the cottage, where all of the family gathers. In the winter, this area is perfect for cooking on the grill.

Knowing the qualities of the design of the summer kitchen, you can create a trusted room, which will be a pleasure to be in at any time of the year.

Characteristics

Its immediate purpose is to serve as a place for cooking. But most dacha owners use it not just in the warm season. In the fall, for example, it’s convenient to take part in processing of fruits, berries and vegetables, canning, cooking compotes. Here you can also equip another sleeping area, organize laundry, and also, of course, to collect guests around a big table.

The construction of any summer kitchen requires the creation of a preliminary project, which is calculated all of the nuances and attributes.

One of the significant elements influencing the additional operation of the kitchen is the place. It is necessary to choose the site so that there was an opportunity to conduct all the essential utilities: gas, sewerage, water, electricity.

Such buildings should not be adjacent to the bathroom, mulch pit and other disagreeable places.

It’s best if the kitchen windows will face north-east, this will keep the coolness during the summer days. It’s not uncommon to arrange a basement in the basement of summertime kitchens – this is a sensible solution instantly improves the functionality of this room.
Particular care should be paid into the furnace, which is timber, gas or electric. In case the installation of a grill is intended, it is encouraged to determine in advance where the products will soon be baked in order to properly locate the essential engineering systems.

An important facet in equipping the location for your barbecue and barbecue is that the observance of fire safety rules. It’s not recommended to place a table or equip a seating area close to the cooker. Usually, the space around it is filled with cupboards for dishes, drawers, sink. For cooking to be a pleasant process, their arrangement must be practical and easy to use.

On the land of this summer kitchen has to be outfitted with a recreation area with comfortable furniture. The best approach plastic or wicker tables and chairs. An important element for 1poparnikam.ru a comfortable stay in this room – is high-quality lighting.

When choosing lamps, pay attention to cheap LED lamps, the use of which will reduce energy consumption.

Recently, wood stoves, that can be used both independently and together with a traditional stove, have become very common. To be able to avoid problems with the operation of the stove, it’s advised to consider all the associated nuances in advance.

Projects

Just about any dacha plot is acceptable for the building of a small or large kitchen. There are many types of these rooms, among which you can choose a project appropriate in size and settings for a particular plot.

Kitchens are divided in to two types: open and closed. The most primitive version of the open kind, with that it’s sensible to cope with their own hands is a patio.

The next version of kitchens comprises verandas, the area of that can be shut completely or partly. We will talk about the most common and popular types of these constructions.

In today’s world with the help of different computer programs you can, indeed, make an ideal and one of a kind project of your house. Someone can really erect the house of his dreams, if only he wanted to!

Features

Today, projects of modern houses and cottages bring to life the many unusual and daring ideas in the layout and facades.

To start with, you need to decide in what style you need to see your dream home.

Adhering to this style, the most simple forms, light colours and unpretentious decor are used. This fashion is embodied in wood, metal, glass and concrete. The pluses of minimalism are a massive space and an abundance of light. Projects of cottages at the style of minimalism help to save on construction and interior decoration.

High-tech – unlike minimalism, the decoration uses rough and dark colors, there are frequently notes of brutality. This fashion is dominated by means of restraint.

Fusion – combines several styles at once. Employing this décor, you may easily combine minimalism and Gothic, castle and classic, attic and high tech.

The 1pokryshe.ru process of creating a project for a modern house includes several phases:

• Architectural – the dimensions of the future construction, the appearance of these facades are ascertained;
• constructive – the job of the foundation, windows, stairs, doors and flooring are mended;
• technology – draws a scheme of place of future communications, outletsand taps;
• design-project – an interior decoration of the home with specification of substances;
• cost estimates – material costs required at every stage of construction are recorded.

Employed substances

The selection of material for building a house is very varied. Giving preference to some of these substances, it is necessary to properly study each of these.

Country homes made of brick are environmentally friendly, frost-resistant and fireproof.

Brick has a very long service life, high strength and good sound insulation.

Today houses made of timber are also popular. Listed below are the main advantages of this substance.

Construction from wood is many times more economical compared to other materials. If you’re planning an economy class house, birch will be perfect.
Exceptionally environmentally friendly, it doesn’t emit any harmful chemicals. A great option for those that suffer with allergies.
Outstanding oxygen permeability.
After the house is constructed, you can move in right away. The interior end of the wood will fit perfectly to the inside.

Country homes and cottages made of natural timber look great. A lot of men and women wish to see their house at one with nature. Natural wood is best. Log homes are environmentally friendly, look great externally, are durable and keep heat well.

Project Overview

Today, catalogs are brimming with a variety of ready-made country houses and posh cottages. You may readily find a project for every preference: a cottage with scenic windows, with open verandas, with extensions that are themed, and even with a swimming pool.

When intending to Construct a country house, a Individual pursues the following goals:

Solitude, the desire to be alone with character;
The chance to get strength in the fresh air, a break in the noisy city;
the possibility to improve their healthto perform improvement of the website.

Most often the diversion area in suburban homes are dwelling terraces. They are both open and closed areas where you can easily spend some time together with friends over a shish kebab, a cup of tea and an intriguing book, go in for sports or yoga.

Cottages with a glazed terrace are preferred, so it can be utilized both in winter and summer.

In today’s world, the car has long become an essential part of every household. Therefore, on private plots are also constructed and garages.

The garage could be constructed as a separate building or, on the contrary, it may be linked to the home, which makes it an integral part of it.

High-tech cottage is a multifunctional house, the plan of which absorbed the fantasy of science fiction ideas. The features of the house allow you to move away from conventional foundations. Cottage projects skillfully combine the most recent scientific achievements in architecture and controlled design.

Characteristics

The exterior characteristics of hi-tech cottages successfully combine clear contemporary forms together with tasteful versatility. The Key features of homes in the high-tech style are as follows:

Uncommonness – the design is modern and only growing in the actual estate marketplace; the popularity of the design greatly exceeds its rapid turnaround in projects, so the completed structures are striking with their simple, but at the same time elegant boundaries, and attracts the eye;
clear geometric shapes – the architecture of high tech is characterized by strict rectangular and cubic attributes, one of which there is no decorative excesses; despite this, the total look of projects always looks very impressive and elegant;

Flat roof is a multifunctional layout of the house, where the flat roof can protrude significantly beyond the boundaries of the chief building and function as an additional equipped spot for diversion, most frequently a patio;

Mirror and glass surfaces are another principal characteristic of cottages, which is not only decorative, but also functional; the windows in these projects are always very broad, which enables a sufficient quantity of daylight to enter the house and visually make the space of the rooms bigger;
Minimalism – a limited number of architectural methods, various materials and way of decoration used in the preparation of this project enables to accomplish a modern appearance of the cabin.

Significant: projects of high tech style are created using high tech tools and programs, so they are often connected to the popular system”smart house”.

Projects

Most often they are lined up in sequence of symmetry or as a result of the flat roof seem like a couple of boxes that are piled into a intricate structure. These substances are most commonly Utilized in structure:

• Steel;
• reinforced concrete;
• reinforced glass;
• foam cubes;
• organic rock.

Rarely cottages include components of brick and wooden beams. Typically, high-tech projects are distinguished by a flat roof and scenic windows from ceiling to floor, but there are also variations with a traditional gable roof. As interior walls for zoning, the use of glass or polycarbonate panels is preferred. Each region of the home should be functional and contain practical benefits. Abuse of architectural decoration is unacceptable – that the opinion of the cottage has to be clearly considered.

Thus, the open part of the apartment ceiling or ceiling is frequently turned into an additional spot for comfort and equipped with furniture.

Design

The main requirements of high tech projects are the observance of the correct clear lines in the project, as well as the combination of a light restrained color palette. All this produces a particular effect of minimalism together with business elegance. Most frequently the interior is completed from the loft style. And innovative methods allow for the proper integration of high technologies in the arrangement of the house and make it high-tech and multifunctional in performance.

Mirror and glass components in combination with numerous sources of light enable you to visually improve the space of the room, without depriving it of a sense of comfort. When decorating facades, usually, expensive materials are used, thanks to the design of this home does not appear too simple.

Wooden elements along with concrete or metal make the facade more lively and more comfy.

Beautiful examples

A 1pokirpichu.ru classic version of the cabin in the style of high tech, which combines minimalism and elegance. The house has a simple design, but it appears quite magnificent. Large panoramic windows provide additional light to the chambers of the house, plus a flat roof highlights the construction from the backdrop of traditional options.

Clear lines and competent division of functional areas make the decoration of the house functional and at the exact same time cozy.

The porch-terrace and the open panoramic area to the yard create the space visually bigger and allow you to attain the essential impact of modernity of the idea.