- DOVE SIAMO
- PRIMA E DOPO
- ARREDI E PAVIMENTI PER ESTERNI
- ARREDI PER INTERNI
- PAVIMENTI IN LEGNO
- SCALE E RINGHIERE
Flexible stone is a finishing material made on the grounds of sandstone. It’s employed in completing functions on several surfaces, both inside and outside the building. Its thickness changes around 3 mm, and width and length can differ and depend on the magnitude of the surface to be repaired. Flexible rock is gaining popularity and is valued for its many properties, however, it also has its disadvantages. Pros and cons of flexible stone
The Benefits of flexible rock include:
Together with its favorable characteristics, flexible rock has a number of drawbacks:
The expense of imitation is significantly lower than the organic flexible stone, but experts do not advise buying it for several factors. For flexible rock takes epoxy mortar, unlike imitation
Read: Foamplex or foam plastic, which can be better?
When completing with this kind of an analogue, quite often there are defects – fractures, breaks. Additionally, it isn’t uncommon for the crumbling of this sandy pattern from the rock. Therefore, folks versed in construction subtleties, do not counsel saving on the purchase of elastic stone at the cost of the purchase price of a inexpensive analogue.
Engineered rock is a finishing material manufactured on the grounds of sandstone. It’s employed in completing works on several different surfaces, both indoors and outside the building. Its thickness varies up to 3 mm, and width and length can differ and are based on the dimensions of their surface to be repaired. Flexible stone is gaining popularity and is valued for its numerous properties, but additionally, it has its disadvantages. Pros and cons of elastic stone
The advantages of flexible rock include:
Together with its positive characteristics, flexible rock has a number of downsides:
The expense of imitation is much lower compared to natural elastic stone, but experts don’t advise buying it for quite a few reasons. For elastic stone requires epoxy mortar, unlike fake
Also read: Foamplex or polyurethane plastic, which can be better?
When completing with this kind of an analogue, quite often there are flaws – cracks, fractures. Moreover, it isn’t unusual for the temptations of this sandy pattern in the rock. Therefore, people versed in building subtleties, do not suggest saving on purchasing elastic stone at the cost of the purchase of a inexpensive analogue.
Right now there are a great deal of floor coverings, therefore it is not too simple to select the best one. Relatively recently, a new material – engineered plank has appeared. Many have wondered what’s better, wood or engineered floors. It’s important to be aware of what the distinction is, so as to choose the ideal floor for your home with your hands. What’s the difference between engineered board and parquet?
Engineered board refers to contemporary floor, consisting of two layers. The first standard layer is put at the base. The production material is obviously birch. The second layer, located on the top, is made of veneer (sawn) of conventional and exotic woods.
Engineered board is durable and strong and exceeds parquet in these attributes. This flooring is most frequently produced from expensive species of wood and it guarantees the fantastic quality of the substance. This board looks great in almost any interior.
Parquet, unlike engineered boards, is not really dependable and durable. Repairs may be made many times. This type of board can be put in the underfloor heating system, this can be the gap between engineered planks and parquet. Parquet, unlike engineered plank, is much less dependable and durable. Engineered floors is readily scraped, sanded and varnished once worn. Repairs can be made many times.
Even after lengthy periods of time the link points don’t give rise to fractures and remain faithfully secured. The multilayered structure helps to ensure that the joints remain in place. With changes in humidity and temperatures that the planking remains in its initial condition. This simple fact makes it feasible to use it in case of full coverage of the flooring .
To absorb noises, an acoustic special substrate with holes is made for this kind of board. The thickness of the coat can be any. This simple fact allows you to connect a variety of floor coverings.
It’s possible to install the plank onto a standard concrete screed, since the board includes a strand of moisture-resistant plywood. Engineering plank is offered in various versions and can easily be paired with almost any style of dwelling.
It is possible to install the plank on a typical concrete screed, since the board includes a moisture-resistant plywood underlayment. Engineered planking is sold in a variety of vsyavagonka.ru versions and isn’t hard to match with any house design.
Also read: New coatings for flat flooring
Parquet, sadly, doesn’t possess these attributes, but with confidence can compare with many floor coverings as well as triumph. It comes just in the form of joint boards, an unusual layout mix which lets you create very beautiful joints.
The bathroom is a room with specific terms: high humidity, humidity differences. That’s why making fixes in the bathroom, you need to clearly plan the entire working process, to consider the sequence of steps to be achieved. Within the following guide, you will discover the way to start the fix in the bathroom and what kinds of work ought to be carried out with your own hands. Step-by-step directions for bathroom repair
Phase 1: Establishing a plan and deciding upon a layout solution.
Fix in the toilet can be of two types:
Begin repairs in the bathroom is to determine the design, interior. Think through to the last detail, what’s going to be the space, select a color. Pastel colors are traditional, in addition to a blend of blue and blue, black or peach with beige.
Begin repairs at the bathroom is to ascertain the design, interior design. Think in detail, what will be the space, select a color. Pastel colours are considered traditional, in addition to a mix of colours.
Next point is the selection of facing substance. Generally, finishing at the toilet is performed with tile, porcelain tiles, mosaicand vinyl panels. Check the pipes, whether it ought to be replaced. If needed, pick a suitable alternative. Proceed to the measuring function: step all sides, figure out the area of the room. Based on these information, we mark the location of these plumbing fixtures.
Measure 2: the choice of sanitary fittings and material for finishing.
It’s very important to understand that the purchase price of sanitary ware precedes the planning stage, and not vice versa. This means that first we create a new design project, create a plan, and then go to the shop. Yet another thing – you should specify how big your favourite plumbing fittings and inspect the plan, whether it matches.
It is important to understand that the purchase of plumbing fixtures is completed by a preparation stage, rather than vice versa. This usually means that first we develop a new design project, create a plan, then go to the shop. Another one
In terms of stuff for finishing, it’s better to buy them immediately for the whole repair cycle, so that you won’t be distracted if something has been missing. Remember about preparing the vital tools.
Step 3: dismantling plumbing and tiling.
After all the preliminary work has been done, move on to the Start of the task process:
Measure 4: replacement of communications: pipes, electric wiring.
Very often in an older home, you ought to carefully inspect and replace not just the pipes which are in the toilet itself, but also the main riser, and on occasion the interfloor pipes. What’s it worth doing this? Old pipes anytime can give a flow, and then the new repair is going to be emptied, it is going to require additional investment to eliminate defects.
Lots of individuals who hear the word”gazebo” instantly associate it with diversion and summertime. Most of them do not even realize that there are comfortable winter gazebo-houses with grill, at which you may unwind in the middle of winter.
Indoor gazebos with grill can create regular cooking a true pleasure and enjoyable pastime. Foods are cooked on an open flame, which significantly transforms the taste of meals and makes them juicy and wholesome.
Most owners of all suburban locations, along with the positioning of this grill at the gazebo, choose to have a cooker, smokehouse and roaster. There are several options and they rely mainly on the requirements of the owner of the house.
Even a simple version of a closed gazebo having a barbecue is among the coziest places for recreation and recovery.
In a little gazebo, it is possible to vashaterrasa.ru put in a small table along with a sink for cooking. You may even set a refrigerator for storing food in a bigger gazebo. In any case, the space of this room ought to be used practically, because the gazebo is not meant for too much furniture. Most often the traditional area for a dinner is a dining room table and chairs and also a seat for your guests. To conserve space within the room, the chairs can be slid under the table.
Thus, you’ll find more space throughout the realization of your culinary masterpieces.
You will find gazebos that even have a pub or couch for comfortable seating of guests. Such gazebos could be contemplated full-fledged vacation homes with family or friends.
Winter gazebos are always a great vacation in nature. Besides this announcement, It’s worth mentioning other benefits:
Enclosed gazebo using a barbecue can be very diverse, which means you need to opt for those options that can most efficiently combine with the landscape of the cottage area and other buildings.
Plot planning mainly is dependent upon the locations that will need to fit in the landscape and the size of the area. In every situation, the division is individual. But conventionally we can make a branch into the most common zones: recreational, residential, farm buildings, garden and vegetable garden.
The size of each zone is intended on the basis of the total area of the site. With proper zoning around the living area allocated to 20%, household – no more than 15%, vegetable garden and garden occupies about 65-75percent of the territory. Site breakdown plan
When partitioning the land of this plot Lots of fundamental rules and recommendations should be taken into consideration:
There are a number of alternatives for the breakdown of this dacha plot, but each depends upon the form of the land: square, triangular, L-shaped or square.
The relaxation of the owners of the future home largely depends upon a nicely thought-out design plan. A residential home should be made so that it turns into a comfy refuge, filled with pleasant feelings and gave a sense of security and relaxation. Remember about the statutory standards about the space of buildings and trees in the boundaries of neighboring plots. Where and how best to place the house
Planning the placement of a home house on a small scheme, you should Consider the aesthetic standpoint:
It’s also advisable to consider and external variables: if neighbors will be close, how near is that the roadway and on what side of the sun climbs. For a residential house is much better suited to the south or southeast side.
The summertime shower about the dacha plot is regarded as the No. 2 structure, as the very first in importance is your outdoor toilet. At first glance, this simple structure has nothing complex, but this a trifle as the choice and installation of a plastic tank to the shower in the dacha will attract a great deal of difficulty. How to cope with these nuances by themselves, we will now attempt to comprehend. Without or with heating
Before you opt for a tank to your shower from the nation must decide on its performance. On whether this plastic container is going to soon be equipped with heating system, is dependent on the comfort of bathing.
The principal difference between these tanks just installed heating component. Shape, volume, and colour of the product can be very different. It is important that any selected tank had a wide neck, simple to pour water and was securely attached to the roof of the shower home.
Suggestion: Flat black tanks are more effective. A massive part of a thin coating of water will be heated quicker by sunlight. Dark walls of the tank draw the sun’s beams, plus the water inside the tank doesn’t bloom.
Plastic shower tanks such as summer homes are especially popular with consumers for several reasons;
When choosing a plastic tank ought to be aware that the tanks without electrical heating most often are created in volume by 100 to 200 liters. Round heated tanks are created in the shape of drums using a quantity of 50 to 130 liters of water. Flat heated tanks are usually designed for 200 liters of liquid. In any design, water has been poured in buckets via a broad neck or by pump.
Rarely does anyone in the dacha build a capital shower made from brick or cinder block. Normally its use is limited to three summertime and during the planting of the vegetable garden, as well as harvesting. For such a short period it’s sufficient to construct a light cabin from any sheet material. Not a bad option is a shower for dacha from polycarbonate with a living area, which is not difficult to design and make yourself. Why it is Much Better to choose polycarbonate for lining the shower
Polycarbonate is only one substance for cladding a dacha shower. With this particular case with victory will suit exactly the profiled sheeting or batten. Just today we decided to stop only on this gorgeous and durable material.
Let us consider the advantage of using polycarbonate for repainting the shower over other similar substances:
Such a simple construction, as a shower out of polycarbonate for dacha requires the production of the project. It’s not necessary to build complex drawings, and also a simple strategy could be retrieved out. Here you need to immediately decide for yourself what you want to build a shower. Very fast you may create a lightweight stall and only put it to the floor. More complicated in the production of shower on the foundation with warm water heating, however, such a design will probably survive longer. Additionally, at a dacha shower you’ll have the ability to bathe in sunlight.
So, we begin to independently create a project:
Given these nuances, on a bit of paper sketches the scheme of the shower with a polycarbonate dressing area, and then proceed to its structure.
Someone that came to the dacha to operate in the garden or merely to rest should have the opportunity to bathe. The ideal method to do this can be really a summer shower installed in your backyard. However, the weather cannot always please the hot times, along with the water just does not have the time during the day to warm up. The remedy to this problem will be a heated summertime getaway for dacha, which lets you carry water procedures in any weather.
With a very rare trip to shtorymax.ru the dacha there’s absolutely no purpose in building a static arrangement for bathing. Within this situation, a mobile shower, bought in the store will help. The product is not difficult to bring in a bag into the cottage, and when leaving to take with you. The simplest garden shower appearance resembles a rubber mat using a foot pump set up indoors. The source of water is almost any container set on the ground. In the pump two hoses: 1 – for the consumption of water, along with another – to feed it into the watering can.
Works portable bathtub out of stomping your feet on the mat. In the pump is a diaphragm, inlet and outlet valve. You measure the mat with one foot – that the inlet valve opens and the diaphragm brings water in the tank to the pump. Stepped on the mat using the other foot – inlet valve closed and outlet valve opened. Water under pressure went into the hose using a watering can. Mobile shower can be used anywhere in the backyardarea. Best of on the yard in the garden.
Tip! As a reservoir to water, then it is convenient to use a plastic jar from a cooler. It immediately upon arrival at the cabin place it in a bright location. During the day the sun warms the waterand in the day you are able to bathe. Making a project of a stationary summer shower to get dacha
To create a static warm bathtub for dacha will want to come up with a project. Don’t be intimidated, there is nothing complex about it. For the simplest structure is going to do a simple plot, drawn by hands on a scrapbook page. The drawing shows all the dimensions of the future shower enclosure.
Usually erecting showers using their own hands with heat, stick to the Typical parameters:
Sometimes, the thickness and depth of the shower stall may be increased. As an example, for heavy people or in the arrangement of a dressing area. In such situations, the width of the shower cubicle is increased to 1.6 m.
Hint! Dressing room can be coordinated from the anteroom. For this function, close to the shower cubicle set up extra racks, where the tarpaulin is hauled.
Install an outdoor shower can be in any corner of their dacha website. There aren’t any special prerequisites for this construction. Thinking sensibly, no one will place a shower stall at the lawn. It’s much better to take action behind the house or in the backyard, because for your shower will need to organize a small drain. It’s desirable to put the stall at a sunny region to organize the pure heating of water in the sun. In order to save construction materials, the shower stall can be attached to any construction on the south side.
In the event the outdoor shower at the cottage is installed as a distinct structure, it is desirable to not remove it in the home. After all, the water tank is much far better to perform with gas heatingsystem, and, therefore, it will have to pull the pipes out of the electrical meter.
Any dacha or personal home owner faces the problem of earning hay or simply mowing weeds. The ideal helper in this instance is an electric trimmer, and in a brief time will help clean the land from overgrowths. But, selecting a fantastic brushcutter isn’t too easy. To assist the owner in this matter, we have put together a score of the very bought trimmers.
For your trimmer to cope well with the assigned tasks, it’s imperative to select the model properly. This can be achieved not only by name, but taking into account the technical characteristics.
It is a significant mistake to choose a trimmer, contemplating only the energy of the electric motor. First, you will need to pay attention to the kind of power supply. The motor can operate from the AC system or the battery. The brushcutter, operating only from the socket, is stronger and has a mild weight. Cordless models are convenient because of their freedom, but on the power and weight of this product the owner will need to incur small losses.
Secondly, when buying a brushcutter, it’s necessary to take into account the place of installation of the engine. At the top location of the electrical motor, from it into the blades goes a flexible cable or shaft. They carry the torque. Bottom-mounted brushcutters do not have those components.
Suggestion: A brushcutter using a top-mounted motor is more convenient to use because of their proportional weight reduction.
The decrease arrangement of the engine is characteristic only for weak trimmers with power not more than 650 W, in addition to battery models. In the next scenario, the battery has been mounted on top close to the grip. This achieves the ideal balance of this machine.
Important: If the motor is mounted at the floor, moisture may get inside while mowing grass with dew. This will cause a quick breakdown of the electric motor.
The convenience of working together with the trimmer is dependent on the form of the boom. In the curved edition, the turning of the working head is carried out due to the flexible cable. This type of drive is less reliable, but because of this boom it is convenient to get the grass under the benches and other hard-to-reach areas. From the horizontal version, the torque is transmitted by a shaft. This drive is far more reliable, however, the operator will need to bend down to get under any object using a brushcutter.
Every autumn we’ve got the exceptional chance to respect the fall of leaves and revel in the rustling of dry leaves under our feet. Red, yellow and orange”flakes” decorate lawns and yards, however with the arrival of the storms, the attractiveness fades and also the glowing carpet of verdant leaves turns right into a thick coating of corrosion. That is why owners of state plots try to remove the leaves punctually, putting them into compost or draining them. The very best helper for accumulating leaves because ancient times is a rake. This”convenient” gardening tool isn’t hard to use and not pricey. But today’s marketplace of garden tools can surprise with a variety of unique models. In order not to get confused and choose the most convenient rake for cleanup leaves you need to get familiar with the proposals. We will attempt to provide a description of all known models and give them the most objective attribute.
Because once upon a time, a rake was not a commonly used T-shaped tool, but all those things which can pick up and move anything. samodomik.ru By way of example, a human hand, a kitchen spoon or some other hook was known as a rake in early times.
This kind of simple but one of a kind tool as a rake is normal around the world. Combat rakes were made entirely of metal and so were called Kumade (bear paw). They had been just two meters long. Only on a fan-shaped crossbar were three to five sharp tines, each 7 cm long.
Lots of proverbs and expressions are made concerning the rake. Many literary works cite them. But every time you get a rake using a T-beam to be able to collect leaves, level the ground or”comb” the grass in the lawn, you have to take care of this. Obviously, since its beginning, the rake has experienced significant alterations, but it’s still worthy of attention, since its history is similar with the history of man, and also for several decades of automation of labor processes, and has not seen a decent replacement for this simple apparatus.
The design of all rakes is about the same: that the instrument consists of a rotating shaft and a crossbar with teeth. The amount of the shaft, the width of the crossbar and its particular form, the substance of manufacture, the amount of teeth in every specific version could be different. Ease of use of an agricultural apparatus largely depends on these attributes. All sorts of pads and locks are also geared toward improving the application. Several innovations and alterations affect not just the functionality, but in addition the total cost of the rake. Therefore, deciding to make a purchase for your backyard, you should make an effort and find a model with an optimal set of attributes and the appropriate cost.
Classification of the rake Based upon the substance of manufacture
Among the most important characteristics is the material from which the rake is made. On it depends durability, weight, and, thus, and ease of use, the expense of this tool.
They have maybe the only advantage – a very low price. Otherwise, their characteristic has just negative attributes. Such rakes are very heavy, they are inconvenient to work with. The teeth quickly flip out, and the backyard application comes into disrepair. This material is also quite heavy, but it’s more durable and wear-resistant.
Important! They are lightweight and durable, but today it’s fairly difficult to come across such a tool on sale.
Every owner of a personal yard acquires a cellar. It’s dug out under the house, garagedoor or only on the territory of the website. Nevertheless, in any location, to get inside, you need a ladder to the basement, and quite reliable and comfortable. On the steps might need to measure with this load. Perhaps children or the elderly will soon be descending into the cellar. Stairs must provide a safe and comfortable descent, without consuming unnecessary space within the basement.
Basic requirements which should be adhered to during the calculation of stairs dimensions
So, whether the basement is located in the garage, below the house or on the site, to return inside you may require a cozy staircase. The easiest layout for basements is considered a ladder, but it is comfortable to go down or up will not operate. And after all with itself will probably need to take the load, for example roomgood.ru, potatoes or canned goods. The very best option is a straight staircase. If the size of the cellar allows, it’s far better to elect for this option.
Determined with the model, don’t immediately proceed into the structure. First do the improvement of the stairs, adhering to these rules:
It’s not difficult to do self-calculations. Just take the amount of the ladder, and separated from the height of this measure. In case the outcome turned out, by way of example, 16.6 bits, then 1 measure on top or underside can be carried out with a cancel.
Care! The previous step is the base of the staircase, which is, its base, and it is not required to put in it.
Adhering to those recommendations, you will have the ability to build a cozy staircase. To help builders in the photo provides a table of calculations stairs.
There are various alternatives for creating basement staircase, and they all differ from the selection of material. This will depend onhow easy it’ll be to create a structure, what its closing price and period of operation is.